Connect with us

Manufacturing

Reminder: REPORT spam in addition to downvoting!

Republished by Plato

Published

on

Just a brief reminder to report spam in addition to downvoting it.

The subreddit is configured so that moderators receive notifications for reports. That way, if something does slip through the filters, we’ll notice more quickly.

Thanks for your contributions to this subreddit.

Source: https://old.reddit.com/r/manufacturing/comments/6jt3tg/reminder_report_spam_in_addition_to_downvoting/

Manufacturing

Rheoscopic Storm Globe

Forget boring snow globes — build a swirling tempest for your desk using magnetic stirring and LED lightning!

Read more on MAKE

The post Rheoscopic Storm Globe appeared first on Make: DIY Projects and Ideas for Makers.

Republished by Plato

Published

on

This project is from the pages of Make: Magazine. Get your subscription today!

Are you the kind of person who likes a good storm? Staying inside and warm while lightning flashes and the wind lashes the rain around is something I have always enjoyed. What if you could capture that feeling in a sphere that you could keep on your desk?

SEEING TURBULENCE

Rheoscopic fluids allow the currents and turbulence in liquids to be seen. They’re typically made with mica, a mineral that forms small, shiny flat plates that easily move within a fluid. The reflection of light off the mica turns the turbulence into a mesmerizing display.

You can find large spinnable round vessels filled with rheoscopic fluids in science museums (such as the Glasgow Science Centre shown in the video above) to demonstrate atmospheric flows over the surface of a planet, or as art displays (most famously, the Kalliroscopes of Paul Matisse), or even in your living room (the Rheoscopic Disc Coffee Table by Ben Krasnow, Make: Volume 47).

Making a rheoscopic fluid is simple, and it’s easy and inexpensive to buy the mica flakes, because they’re used in manufacturing soap, bath bombs, and makeup. I thought it might be interesting to try to shine a light from behind a rheoscopic fluid display, rather than just relying on reflected light to flash off the mica.

A quick test showed this to be an interesting effect.

The turbulence reminded me of a storm, so I thought it would be fun to bottle some lightning as well!

BOTTLE YOUR OWN STORM

MATERIALS

  • Circuit Playground Bluefruit microcontroller board Adafruit #4333, adafruit.com. Other Circuit Playground boards should work with minor code modifications.
  • Micro-USB cable
  • Fan, 40mm×40mm×10mm
  • DIY Snow Globe Kit Adafruit’s 108mm version, #3722, fits the Circuit Playground perfectly, and was also included in AdaBox014.
  • Colored mica Typically sold for makeup, soap-making, or bath bombs — a very little will go a long way!
  • Rare-earth magnets, 3mm×1mm round (2) Any small strong magnets would likely work fine.
  • Magnetic stir bar, 15mm round aka stirring flea. Other shapes and sizes should work as well or better.
  • Screws and spacers, M2.5 or M3, non-ferrous (brass or plastic)
  • Cyanoacrylate glue

TOOLS

  • Computer
  • Wire cutters and strippers
  • Marker
  • Glue
  • Soldering iron (optional)

1. MAKE A MAGNETIC STIRRER

Take two small magnets and stick them together. Since like poles repel, and opposites attract, this will let you identify the opposite poles of the two magnets. Use a marker to mark the opposite sides of each magnet.

Then glue the magnets down to the edges of the middle of the fan hub. Be sure to do this on the side that spins (the one without the label).

2. WIRE UP THE BLUEFRUIT

We’re going to just use the USB voltage (5V) to power our fan. There are better ways to do this, but let’s keep it simple! Cut off any connector on the fan wires, and strip the wires back a bit. Then attach the black wire to GND, and the red wire to VOUT (which is 5V, if you’re powering the board from USB). You can solder these if you like, or just make sure the wire is wrapped around the edge of the hole tightly to make a good electrical connection.

3. ASSEMBLE THE STIR PLATE

Attach the fan to the Bluefruit using non-ferrous M2.5 or M3 screws and standoffs. On a 40mm fan, the diagonal holes line up perfectly with two of the holes on the Bluefruit, which is convenient. You may need to vary the length of standoffs or screws to get an offset between the fan and the base of the snow globe, but the height of the screw heads should be enough space to allow the fan and magnets to spin.

4. PREPARE THE SNOW GLOBE

Fill the snow globe with water, and add a magnetic stir bar — the little white lozenge shown above. A small bowl can help you keep the snow globe in place, or you can have a friend hold it for you.

It is very easy to add too much mica to your snow globe, which will make a nice swirly effect, but will be completely opaque to light. If you wet the end of a toothpick, dip it in the mica, then into the snow globe, and repeat that process a few times, you’ll have the right amount of mica. Some experimentation may be required, depending on the mica you use.

Place the plastic stopper on the snow globe. If you overfill it a bit, and tilt it while you slowly squeeze the lid on, you can get all the air out to avoid any bubbles.

It’s likely there won’t be enough room to attach the screw-on base; I didn’t use it at all. If you’re worried about leakage, you can glue the plastic stopper on.

5. PREPARE A BASE (OPTIONAL)

Your Storm Globe will work fine without a base. But I decided to make a Mars-themed version, so I designed a base from the 3D model of the Block Island rock mapped by the Opportunity rover on Mars, and 3D printed it. The STL file is available at Github.

6. CODE THE BLUEFRUIT

There’s an excellent Adafruit Learning Guide that explains everything about getting a Bluetooth Snow Globe up and running. Read it at Adafruit. Then download the Storm Glass code from Github; it’s a lightly modified version of their demo code.

The stormy section of the code lights up the LEDs on the Bluefruit in such a way that it looks like a lightning flash. This has some random-ness included in it, so no two lightning flashes are the same.

def lightning(config):
start_time = time.monotonic()
last_update = start_time
while time.monotonic() - start_time < config[‘duration’]:
if time.monotonic() - last_update > config[‘speed’]:
for _ in range(random.randint(1,8)):
pixels.fill(0)
pixels.fill(config[‘color’])
time.sleep(0.02+(.001*random.randint(1,70)))
pixels.fill(0)
time.sleep(.01)
time.sleep(5+random.randint(1,5))
last_update = time.monotonic()

7. START YOUR STORM!

Magnetic stir plates typically include a speed control, which allows you to start the stirring process gradually. This one doesn’t, so you must be careful to get your stir bar stirring correctly.

If you look underneath the snow globe, you should be able to see your stir bar. Tilt the globe around until the stir bar is more or less in the middle, and then place it on top of the assembled base. Then plug the Bluefruit into a USB port to start the stirring effect. If the stir bar flings off to one side or just rattles around, you may need to try again or adjust the distance slightly between the fan and the base of the snow globe.

GOING FURTHER

There are a lot of ways you can experiment with your Storm Globe and make it your own. Can you make a better lightning animation or more interesting LED lighting effects? Mount one on the end of a staff for an outstanding wizard costume effect? Maybe put waterproof lights inside the sphere? Connect it to a Lightning Detector circuit (Make: Volume 71, page 105) or trigger it with real-time lightning notifications from lightningmaps.org/apps?

I’ve noticed that the mica tends to eventually settle up against the walls of the globe. Easily fixed with an occasional shake and reset, but perhaps maybe a different stir bar would create enough turbulence to prevent it? (There’s a good overview here.)

Unfortunately we can’t control speed directly from the Bluefruit, since the current draw of most fans is too high for it. However, you could certainly build a small circuit with a transistor to control the speed with the Bluefruit. This could be used to add a speed control knob or to slowly ramp up the stirrer.

I’d love to see what you can do with rheoscopic fluids and lighting effects; feel free to show off on Twitter and let me know @grajohnt!

Checkout PrimeXBT
Trade with the Official CFD Partners of AC Milan
Source: https://makezine.com/projects/rheoscopic-storm-globe/

Continue Reading

Manufacturing

Rheoscopic Storm Globe

Forget boring snow globes — build a swirling tempest for your desk using magnetic stirring and LED lightning!

Read more on MAKE

The post Rheoscopic Storm Globe appeared first on Make: DIY Projects and Ideas for Makers.

Republished by Plato

Published

on

This project is from the pages of Make: Magazine. Get your subscription today!

Are you the kind of person who likes a good storm? Staying inside and warm while lightning flashes and the wind lashes the rain around is something I have always enjoyed. What if you could capture that feeling in a sphere that you could keep on your desk?

SEEING TURBULENCE

Rheoscopic fluids allow the currents and turbulence in liquids to be seen. They’re typically made with mica, a mineral that forms small, shiny flat plates that easily move within a fluid. The reflection of light off the mica turns the turbulence into a mesmerizing display.

You can find large spinnable round vessels filled with rheoscopic fluids in science museums (such as the Glasgow Science Centre shown in the video above) to demonstrate atmospheric flows over the surface of a planet, or as art displays (most famously, the Kalliroscopes of Paul Matisse), or even in your living room (the Rheoscopic Disc Coffee Table by Ben Krasnow, Make: Volume 47).

Making a rheoscopic fluid is simple, and it’s easy and inexpensive to buy the mica flakes, because they’re used in manufacturing soap, bath bombs, and makeup. I thought it might be interesting to try to shine a light from behind a rheoscopic fluid display, rather than just relying on reflected light to flash off the mica.

A quick test showed this to be an interesting effect.

The turbulence reminded me of a storm, so I thought it would be fun to bottle some lightning as well!

BOTTLE YOUR OWN STORM

MATERIALS

  • Circuit Playground Bluefruit microcontroller board Adafruit #4333, adafruit.com. Other Circuit Playground boards should work with minor code modifications.
  • Micro-USB cable
  • Fan, 40mm×40mm×10mm
  • DIY Snow Globe Kit Adafruit’s 108mm version, #3722, fits the Circuit Playground perfectly, and was also included in AdaBox014.
  • Colored mica Typically sold for makeup, soap-making, or bath bombs — a very little will go a long way!
  • Rare-earth magnets, 3mm×1mm round (2) Any small strong magnets would likely work fine.
  • Magnetic stir bar, 15mm round aka stirring flea. Other shapes and sizes should work as well or better.
  • Screws and spacers, M2.5 or M3, non-ferrous (brass or plastic)
  • Cyanoacrylate glue

TOOLS

  • Computer
  • Wire cutters and strippers
  • Marker
  • Glue
  • Soldering iron (optional)

1. MAKE A MAGNETIC STIRRER

Take two small magnets and stick them together. Since like poles repel, and opposites attract, this will let you identify the opposite poles of the two magnets. Use a marker to mark the opposite sides of each magnet.

Then glue the magnets down to the edges of the middle of the fan hub. Be sure to do this on the side that spins (the one without the label).

2. WIRE UP THE BLUEFRUIT

We’re going to just use the USB voltage (5V) to power our fan. There are better ways to do this, but let’s keep it simple! Cut off any connector on the fan wires, and strip the wires back a bit. Then attach the black wire to GND, and the red wire to VOUT (which is 5V, if you’re powering the board from USB). You can solder these if you like, or just make sure the wire is wrapped around the edge of the hole tightly to make a good electrical connection.

3. ASSEMBLE THE STIR PLATE

Attach the fan to the Bluefruit using non-ferrous M2.5 or M3 screws and standoffs. On a 40mm fan, the diagonal holes line up perfectly with two of the holes on the Bluefruit, which is convenient. You may need to vary the length of standoffs or screws to get an offset between the fan and the base of the snow globe, but the height of the screw heads should be enough space to allow the fan and magnets to spin.

4. PREPARE THE SNOW GLOBE

Fill the snow globe with water, and add a magnetic stir bar — the little white lozenge shown above. A small bowl can help you keep the snow globe in place, or you can have a friend hold it for you.

It is very easy to add too much mica to your snow globe, which will make a nice swirly effect, but will be completely opaque to light. If you wet the end of a toothpick, dip it in the mica, then into the snow globe, and repeat that process a few times, you’ll have the right amount of mica. Some experimentation may be required, depending on the mica you use.

Place the plastic stopper on the snow globe. If you overfill it a bit, and tilt it while you slowly squeeze the lid on, you can get all the air out to avoid any bubbles.

It’s likely there won’t be enough room to attach the screw-on base; I didn’t use it at all. If you’re worried about leakage, you can glue the plastic stopper on.

5. PREPARE A BASE (OPTIONAL)

Your Storm Globe will work fine without a base. But I decided to make a Mars-themed version, so I designed a base from the 3D model of the Block Island rock mapped by the Opportunity rover on Mars, and 3D printed it. The STL file is available at Github.

6. CODE THE BLUEFRUIT

There’s an excellent Adafruit Learning Guide that explains everything about getting a Bluetooth Snow Globe up and running. Read it at Adafruit. Then download the Storm Glass code from Github; it’s a lightly modified version of their demo code.

The stormy section of the code lights up the LEDs on the Bluefruit in such a way that it looks like a lightning flash. This has some random-ness included in it, so no two lightning flashes are the same.

def lightning(config):
start_time = time.monotonic()
last_update = start_time
while time.monotonic() - start_time < config[‘duration’]:
if time.monotonic() - last_update > config[‘speed’]:
for _ in range(random.randint(1,8)):
pixels.fill(0)
pixels.fill(config[‘color’])
time.sleep(0.02+(.001*random.randint(1,70)))
pixels.fill(0)
time.sleep(.01)
time.sleep(5+random.randint(1,5))
last_update = time.monotonic()

7. START YOUR STORM!

Magnetic stir plates typically include a speed control, which allows you to start the stirring process gradually. This one doesn’t, so you must be careful to get your stir bar stirring correctly.

If you look underneath the snow globe, you should be able to see your stir bar. Tilt the globe around until the stir bar is more or less in the middle, and then place it on top of the assembled base. Then plug the Bluefruit into a USB port to start the stirring effect. If the stir bar flings off to one side or just rattles around, you may need to try again or adjust the distance slightly between the fan and the base of the snow globe.

GOING FURTHER

There are a lot of ways you can experiment with your Storm Globe and make it your own. Can you make a better lightning animation or more interesting LED lighting effects? Mount one on the end of a staff for an outstanding wizard costume effect? Maybe put waterproof lights inside the sphere? Connect it to a Lightning Detector circuit (Make: Volume 71, page 105) or trigger it with real-time lightning notifications from lightningmaps.org/apps?

I’ve noticed that the mica tends to eventually settle up against the walls of the globe. Easily fixed with an occasional shake and reset, but perhaps maybe a different stir bar would create enough turbulence to prevent it? (There’s a good overview here.)

Unfortunately we can’t control speed directly from the Bluefruit, since the current draw of most fans is too high for it. However, you could certainly build a small circuit with a transistor to control the speed with the Bluefruit. This could be used to add a speed control knob or to slowly ramp up the stirrer.

I’d love to see what you can do with rheoscopic fluids and lighting effects; feel free to show off on Twitter and let me know @grajohnt!

Checkout PrimeXBT
Trade with the Official CFD Partners of AC Milan
Source: https://makezine.com/projects/rheoscopic-storm-globe/

Continue Reading

Manufacturing

Rheoscopic Storm Globe

Forget boring snow globes — build a swirling tempest for your desk using magnetic stirring and LED lightning!

Read more on MAKE

The post Rheoscopic Storm Globe appeared first on Make: DIY Projects and Ideas for Makers.

Republished by Plato

Published

on

This project is from the pages of Make: Magazine. Get your subscription today!

Are you the kind of person who likes a good storm? Staying inside and warm while lightning flashes and the wind lashes the rain around is something I have always enjoyed. What if you could capture that feeling in a sphere that you could keep on your desk?

SEEING TURBULENCE

Rheoscopic fluids allow the currents and turbulence in liquids to be seen. They’re typically made with mica, a mineral that forms small, shiny flat plates that easily move within a fluid. The reflection of light off the mica turns the turbulence into a mesmerizing display.

You can find large spinnable round vessels filled with rheoscopic fluids in science museums (such as the Glasgow Science Centre shown in the video above) to demonstrate atmospheric flows over the surface of a planet, or as art displays (most famously, the Kalliroscopes of Paul Matisse), or even in your living room (the Rheoscopic Disc Coffee Table by Ben Krasnow, Make: Volume 47).

Making a rheoscopic fluid is simple, and it’s easy and inexpensive to buy the mica flakes, because they’re used in manufacturing soap, bath bombs, and makeup. I thought it might be interesting to try to shine a light from behind a rheoscopic fluid display, rather than just relying on reflected light to flash off the mica.

A quick test showed this to be an interesting effect.

The turbulence reminded me of a storm, so I thought it would be fun to bottle some lightning as well!

BOTTLE YOUR OWN STORM

MATERIALS

  • Circuit Playground Bluefruit microcontroller board Adafruit #4333, adafruit.com. Other Circuit Playground boards should work with minor code modifications.
  • Micro-USB cable
  • Fan, 40mm×40mm×10mm
  • DIY Snow Globe Kit Adafruit’s 108mm version, #3722, fits the Circuit Playground perfectly, and was also included in AdaBox014.
  • Colored mica Typically sold for makeup, soap-making, or bath bombs — a very little will go a long way!
  • Rare-earth magnets, 3mm×1mm round (2) Any small strong magnets would likely work fine.
  • Magnetic stir bar, 15mm round aka stirring flea. Other shapes and sizes should work as well or better.
  • Screws and spacers, M2.5 or M3, non-ferrous (brass or plastic)
  • Cyanoacrylate glue

TOOLS

  • Computer
  • Wire cutters and strippers
  • Marker
  • Glue
  • Soldering iron (optional)

1. MAKE A MAGNETIC STIRRER

Take two small magnets and stick them together. Since like poles repel, and opposites attract, this will let you identify the opposite poles of the two magnets. Use a marker to mark the opposite sides of each magnet.

Then glue the magnets down to the edges of the middle of the fan hub. Be sure to do this on the side that spins (the one without the label).

2. WIRE UP THE BLUEFRUIT

We’re going to just use the USB voltage (5V) to power our fan. There are better ways to do this, but let’s keep it simple! Cut off any connector on the fan wires, and strip the wires back a bit. Then attach the black wire to GND, and the red wire to VOUT (which is 5V, if you’re powering the board from USB). You can solder these if you like, or just make sure the wire is wrapped around the edge of the hole tightly to make a good electrical connection.

3. ASSEMBLE THE STIR PLATE

Attach the fan to the Bluefruit using non-ferrous M2.5 or M3 screws and standoffs. On a 40mm fan, the diagonal holes line up perfectly with two of the holes on the Bluefruit, which is convenient. You may need to vary the length of standoffs or screws to get an offset between the fan and the base of the snow globe, but the height of the screw heads should be enough space to allow the fan and magnets to spin.

4. PREPARE THE SNOW GLOBE

Fill the snow globe with water, and add a magnetic stir bar — the little white lozenge shown above. A small bowl can help you keep the snow globe in place, or you can have a friend hold it for you.

It is very easy to add too much mica to your snow globe, which will make a nice swirly effect, but will be completely opaque to light. If you wet the end of a toothpick, dip it in the mica, then into the snow globe, and repeat that process a few times, you’ll have the right amount of mica. Some experimentation may be required, depending on the mica you use.

Place the plastic stopper on the snow globe. If you overfill it a bit, and tilt it while you slowly squeeze the lid on, you can get all the air out to avoid any bubbles.

It’s likely there won’t be enough room to attach the screw-on base; I didn’t use it at all. If you’re worried about leakage, you can glue the plastic stopper on.

5. PREPARE A BASE (OPTIONAL)

Your Storm Globe will work fine without a base. But I decided to make a Mars-themed version, so I designed a base from the 3D model of the Block Island rock mapped by the Opportunity rover on Mars, and 3D printed it. The STL file is available at Github.

6. CODE THE BLUEFRUIT

There’s an excellent Adafruit Learning Guide that explains everything about getting a Bluetooth Snow Globe up and running. Read it at Adafruit. Then download the Storm Glass code from Github; it’s a lightly modified version of their demo code.

The stormy section of the code lights up the LEDs on the Bluefruit in such a way that it looks like a lightning flash. This has some random-ness included in it, so no two lightning flashes are the same.

def lightning(config):
start_time = time.monotonic()
last_update = start_time
while time.monotonic() - start_time < config[‘duration’]:
if time.monotonic() - last_update > config[‘speed’]:
for _ in range(random.randint(1,8)):
pixels.fill(0)
pixels.fill(config[‘color’])
time.sleep(0.02+(.001*random.randint(1,70)))
pixels.fill(0)
time.sleep(.01)
time.sleep(5+random.randint(1,5))
last_update = time.monotonic()

7. START YOUR STORM!

Magnetic stir plates typically include a speed control, which allows you to start the stirring process gradually. This one doesn’t, so you must be careful to get your stir bar stirring correctly.

If you look underneath the snow globe, you should be able to see your stir bar. Tilt the globe around until the stir bar is more or less in the middle, and then place it on top of the assembled base. Then plug the Bluefruit into a USB port to start the stirring effect. If the stir bar flings off to one side or just rattles around, you may need to try again or adjust the distance slightly between the fan and the base of the snow globe.

GOING FURTHER

There are a lot of ways you can experiment with your Storm Globe and make it your own. Can you make a better lightning animation or more interesting LED lighting effects? Mount one on the end of a staff for an outstanding wizard costume effect? Maybe put waterproof lights inside the sphere? Connect it to a Lightning Detector circuit (Make: Volume 71, page 105) or trigger it with real-time lightning notifications from lightningmaps.org/apps?

I’ve noticed that the mica tends to eventually settle up against the walls of the globe. Easily fixed with an occasional shake and reset, but perhaps maybe a different stir bar would create enough turbulence to prevent it? (There’s a good overview here.)

Unfortunately we can’t control speed directly from the Bluefruit, since the current draw of most fans is too high for it. However, you could certainly build a small circuit with a transistor to control the speed with the Bluefruit. This could be used to add a speed control knob or to slowly ramp up the stirrer.

I’d love to see what you can do with rheoscopic fluids and lighting effects; feel free to show off on Twitter and let me know @grajohnt!

Checkout PrimeXBT
Trade with the Official CFD Partners of AC Milan
Source: https://makezine.com/projects/rheoscopic-storm-globe/

Continue Reading
Heartland4 days ago

CBD Vape Oil Market 2021: Global Trends, Business Overview, Challenges, Opportunities …

Heartland5 days ago

Industrial Hemp in Automotive Market Estimated Forecast Analysis 2021-2030

Material4 days ago

Microstructure, characterization of interfacial phases and mechanical properties of high Nb–TiAl/Al2O3 joints brazed by novel Nb particle-reinforced Ag–Cu filler alloy

Heartland5 days ago

National Hemp Association Awards First Recipients of Social Equity Conscious Business (SECB …

Heartland4 days ago

Drew Carey CBD – How Does It Work For Body Pain

Heartland5 days ago

Heartland5 days ago

Heartland5 days ago

Natures Method CBD Gummies : How To Order & Basic Price Detail?

Material5 days ago

Experimental study on evolution of oxidation behavior on high-temperature continuous casting slab surface

Heartland4 days ago

Hemp a budding industry in New Mexico

Material5 days ago

Size effect on the high strain rate micro/meso-tensile behaviors of pure titanium foil

Heartland5 days ago

Cannabis and the Autistic Spectrum

Material4 days ago

Corrosion resistance and electrical contact resistance of a thin permanganate conversion coating on dual-phase LZ91 Mg–Li alloy

Heartland5 days ago

Sleep-wake cycle disturbances and NeuN-altered expression in adult rats after cannabidiol treatments during adolescence

Heartland5 days ago

Heartland4 days ago

The CBD Skincare Line Nicole Kidman Swears By

Heartland3 days ago

Hello, im new to CBD and I just got this e-liquid and a pen. I looked up the vape juice after, and it doesn’t seem to exist.. Has anyone else used this brand?

Material5 days ago

The effect of flux chemistry on element transfer in Submerged Arc Welding: application of thermochemical modelling

Metal4 days ago

ExOne names distributor in South Korea

Heartland4 days ago

Heartland4 days ago

House passes $1.9 trillion COVID relief plan

Heartland5 days ago

Can cbd become ineffective?

Heartland4 days ago

Metal2 days ago

ArcelorMittal raises CRC and HDG prices in Europe

Heartland4 days ago

Hemp a budding industry in New Mexico

Heartland3 days ago

Top 5 reasons people use CBD tinctures

News2 days ago

Automated processing of aerospace scrap for precious elements

Heartland1 day ago

CBD and Menopause

Heartland5 days ago

Global CBD Hemp Oil Market 2021 Analysis Trend, Applications, Industry Chain Structure, Growth …

Heartland4 days ago

https://gayle-king-cbdoil-review.medium.com/gayle-king-cbdoil-real-reviews-and

Trending

A Cloud Nine Capital Entity Copyright © 2020 – All Rights Reserved Proudly Made in America