Connect with us

Material Science

Materials Innovation for Energy and Water


Prof Jeffrey C. Grossman, Department of Materials Science and Engineering, Massachusetts Institute of Technology
Prof Jeffrey C. Grossman, Department of Materials Science and Engineering, Massachusetts Institute of Technology

The webinar on "Materials Innovation for Energy and Water" presented by Prof Jeffrey C. Grossman from the Department of Materials Science and Engineering at the Massachusetts Institute of Technology is now available to view. 

To view the recording, just Log In to your Materials Today website account below.

Not yet registered? Simply Sign Up below, and return to this page.

Materials Today Advances is a new open access journal which aims to connect different communities within materials science, highlighting studies that make a significant impact to the field. We are now delighted to introduce the Materials Today Advances Lectureship Award, a new series of awards presented to leading researchers performing ground-breaking work at the forefront of materials science. Each awardee will be invited to present a webinar on their work, followed by a live Q&A – all free for everyone to access. We are very pleased to announce that the first recipient of the Materials Today Advances Lectureship Award is Prof Jeffrey C. Grossman from the Department of Materials Science and Engineering at the Massachusetts Institute of Technology.

 

———-

Webinar title: Materials Innovation for Energy and Water

Presenter: Prof Jeffrey C. Grossman from the Department of Materials Science and Engineering at the Massachusetts Institute of Technology.

Abstract: Our planet’s health needs an acceleration in the pace of progress towards clean and sustainable energy and water technologies. Advances in these technologies are critically dependent on materials innovation, which in turn relies on the ability to understand and control matter at the atomic scale to realize optimized performance across an exhaustive set of metrics. Materials science and engineering is at the core of energy and water challenges. Many key mechanisms that convert and store energy or enable cost-effective water purification are dominated by the intrinsic properties of the active materials involved. Our imperative is to predict, identify, and manufacture new materials as comprehensively and rapidly as possible to enable game-changing forward leaps rather than incremental advances. This lecture will discuss the impact of materials design in applications related to renewable energy and clean water. Recent examples will be highlighted from our work on resilient nanofiltration membranes, thermal storage, natural carbon devices, and photovoltaics. 

Bio: Jeffrey C. Grossman is the Department Head of Materials Science and Engineering at the Massachusetts Institute of Technology and the Morton and Claire Goulder and Family Professor in Environmental Systems. He received his PhD in theoretical physics from the University of Illinois and performed postdoctoral work at the University of California at Berkeley. He was a Lawrence Fellow at the Lawrence Livermore National Laboratory and returned to Berkeley as director of a Nanoscience Center and head of the Computational Nanoscience research group, with a focus on energy applications. In fall 2009, he joined MIT, where he has developed a research program known for its contributions to energy conversion, energy storage, membranes, and clean-water technologies. In recognition of his contributions to engineering education, Grossman was named an MIT MacVicar Faculty Fellow and received the Bose Award for Excellence in Teaching, in addition to being named a fellow of the American Physical Society. He has published more than 200 scientific papers, holds 17 current or pending U.S. patents, and recently co-founded a company to commercialize graphene-oxide membranes. 

To view the recording, just Log In to your Materials Today website account below. 

———-

For more information on Materials Today Advances, as well as access to all articles in the journal, and instructions on how to submit your original research or review article contributions, just visit the journal homepage. By registering for this webinar, you consent to the terms and conditions described in the Elsevier Privacy Policy. After the webinar, registrants may receive a follow-up message from the editorial team.

Republished by Plato

Published

on


Prof Jeffrey C. Grossman, Department of Materials Science and Engineering, Massachusetts Institute of Technology
Prof Jeffrey C. Grossman, Department of Materials Science and Engineering, Massachusetts Institute of Technology

The webinar on “Materials Innovation for Energy and Water” presented by Prof Jeffrey C. Grossman from the Department of Materials Science and Engineering at the Massachusetts Institute of Technology is now available to view. 

To view the recording, just Log In to your Materials Today website account below.

Not yet registered? Simply Sign Up below, and return to this page.

Materials Today Advances is a new open access journal which aims to connect different communities within materials science, highlighting studies that make a significant impact to the field. We are now delighted to introduce the Materials Today Advances Lectureship Award, a new series of awards presented to leading researchers performing ground-breaking work at the forefront of materials science. Each awardee will be invited to present a webinar on their work, followed by a live Q&A – all free for everyone to access. We are very pleased to announce that the first recipient of the Materials Today Advances Lectureship Award is Prof Jeffrey C. Grossman from the Department of Materials Science and Engineering at the Massachusetts Institute of Technology.

———-

Webinar title: Materials Innovation for Energy and Water

Presenter: Prof Jeffrey C. Grossman from the Department of Materials Science and Engineering at the Massachusetts Institute of Technology.

Abstract: Our planet’s health needs an acceleration in the pace of progress towards clean and sustainable energy and water technologies. Advances in these technologies are critically dependent on materials innovation, which in turn relies on the ability to understand and control matter at the atomic scale to realize optimized performance across an exhaustive set of metrics. Materials science and engineering is at the core of energy and water challenges. Many key mechanisms that convert and store energy or enable cost-effective water purification are dominated by the intrinsic properties of the active materials involved. Our imperative is to predict, identify, and manufacture new materials as comprehensively and rapidly as possible to enable game-changing forward leaps rather than incremental advances. This lecture will discuss the impact of materials design in applications related to renewable energy and clean water. Recent examples will be highlighted from our work on resilient nanofiltration membranes, thermal storage, natural carbon devices, and photovoltaics. 

Bio: Jeffrey C. Grossman is the Department Head of Materials Science and Engineering at the Massachusetts Institute of Technology and the Morton and Claire Goulder and Family Professor in Environmental Systems. He received his PhD in theoretical physics from the University of Illinois and performed postdoctoral work at the University of California at Berkeley. He was a Lawrence Fellow at the Lawrence Livermore National Laboratory and returned to Berkeley as director of a Nanoscience Center and head of the Computational Nanoscience research group, with a focus on energy applications. In fall 2009, he joined MIT, where he has developed a research program known for its contributions to energy conversion, energy storage, membranes, and clean-water technologies. In recognition of his contributions to engineering education, Grossman was named an MIT MacVicar Faculty Fellow and received the Bose Award for Excellence in Teaching, in addition to being named a fellow of the American Physical Society. He has published more than 200 scientific papers, holds 17 current or pending U.S. patents, and recently co-founded a company to commercialize graphene-oxide membranes. 

To view the recording, just Log In to your Materials Today website account below. 

———-

For more information on Materials Today Advances, as well as access to all articles in the journal, and instructions on how to submit your original research or review article contributions, just visit the journal homepage. By registering for this webinar, you consent to the terms and conditions described in the Elsevier Privacy Policy. After the webinar, registrants may receive a follow-up message from the editorial team.

Source: https://www.materialstoday.com/energy/webinars/materials-innovation-for-energy-and-water/

Material Science

Weak force has strong impact on metal nanosheets


A transmission electron microscope image by Rice University scientists shows a silver nanosheet deformed by a particle, which forms flower-shaped stress contours in the nanosheet that indicate a bump. Image: The Jones Lab/Rice University.
A transmission electron microscope image by Rice University scientists shows a silver nanosheet deformed by a particle, which forms flower-shaped stress contours in the nanosheet that indicate a bump. Image: The Jones Lab/Rice University.

New research has revealed that the hills are alive with the force of van der Walls. Researchers at Rice University have found that nature's ubiquitous 'weak' force is sufficient to indent rigid nanosheets, extending their potential for use in nanoscale optics or catalytic systems.

Changing the shape of nanoscale particles changes their electromagnetic properties, said Matt Jones, an assistant professor of chemistry and an assistant professor of materials science and nanoengineering at Rice University. That makes the phenomenon worth further study.

"People care about particle shape, because the shape changes its optical properties," Jones said. "This is a totally novel way of changing the shape of a particle." He and his colleagues report their work in a paper in Nano Letters.

Van der Waals is a weak force that allows neutral molecules to attract one another through randomly fluctuating dipoles, or separated opposite charges, depending on distance. Though small, its effects can be seen in the macro world, like when geckos walk up walls.

"Van der Waals forces are everywhere and, essentially, at the nanoscale everything is sticky," Jones said. "When you put a large, flat particle on a large, flat surface, there's a lot of contact, and it's enough to permanently deform a particle that's really thin and flexible."

In the new study, the Rice team decided to see if this force could be used to manipulate 8nm-thick sheets of ductile silver. After a mathematical model suggested it was possible, the researchers placed 15nm-wide iron oxide nanospheres on a surface and then sprinkled prism-shaped nanosheets over them.

Without applying any other force, they saw through a transmission electron microscope that the nanosheets acquired permanent bumps where none existed before, right on top of the spheres. As measured, the distortions were about 10 times larger than the width of the spheres.

These hills weren't very high, but simulations confirmed that van der Waals attraction between the sheet and the substrate surrounding the spheres was sufficient to influence the plasticity of the silver sheet's crystalline atomic lattice. The researchers also showed that the same effect would occur in silicon dioxide and cadmium selenide nanosheets, and perhaps other compounds.

"We were trying to make really thin, large silver nanoplates and when we started taking images, we saw these strange, six-fold strain patterns, like flowers," said Jones, who earned a multiyear Packard Fellowship in 2018 to develop advanced microscopy techniques.

"It didn't make any sense, but we eventually figured out that it was a little ball of gunk that the plate was draped over, creating the strain," he said. "We didn't think anyone had investigated that, so we decided to have a look.

"What it comes down to is that when you make a particle really thin, it becomes really flexible, even if it's a rigid metal."

In further experiments, the researchers discovered that the nanospheres could be used to control the shape of the deformation, ranging from single ridges when two spheres are close together to saddle shapes or isolated bumps when the spheres are farther apart. They determined that sheets less than about 10nm thick and with aspect ratios of about 100 are most amenable to deformation.

In the paper, the researchers noted their technique creates "a new class of curvilinear structures based on substrate topography" that "would be difficult to generate lithographically". That opens up new possibilities for electromagnetic devices that are especially relevant to nanophotonic research. Straining the silver lattice could also turn the inert metal into a possible catalyst, by creating defects where chemical reactions can happen.

"This gets exciting because now most people make these kinds of metamaterials through lithography," Jones said. "That's a really powerful tool, but once you've used that to pattern your metal, you can never change it.

"Now we have the option, perhaps someday, to build a material that has one set of properties and then change it by deforming it. Because the forces required to do so are so small, we hope to find a way to toggle between the two."

This story is adapted from material from Rice University, with editorial changes made by Materials Today. The views expressed in this article do not necessarily represent those of Elsevier. Link to original source.

Republished by Plato

Published

on


A transmission electron microscope image by Rice University scientists shows a silver nanosheet deformed by a particle, which forms flower-shaped stress contours in the nanosheet that indicate a bump. Image: The Jones Lab/Rice University.
A transmission electron microscope image by Rice University scientists shows a silver nanosheet deformed by a particle, which forms flower-shaped stress contours in the nanosheet that indicate a bump. Image: The Jones Lab/Rice University.

New research has revealed that the hills are alive with the force of van der Walls. Researchers at Rice University have found that nature’s ubiquitous ‘weak’ force is sufficient to indent rigid nanosheets, extending their potential for use in nanoscale optics or catalytic systems.

Changing the shape of nanoscale particles changes their electromagnetic properties, said Matt Jones, an assistant professor of chemistry and an assistant professor of materials science and nanoengineering at Rice University. That makes the phenomenon worth further study.

“People care about particle shape, because the shape changes its optical properties,” Jones said. “This is a totally novel way of changing the shape of a particle.” He and his colleagues report their work in a paper in Nano Letters.

Van der Waals is a weak force that allows neutral molecules to attract one another through randomly fluctuating dipoles, or separated opposite charges, depending on distance. Though small, its effects can be seen in the macro world, like when geckos walk up walls.

“Van der Waals forces are everywhere and, essentially, at the nanoscale everything is sticky,” Jones said. “When you put a large, flat particle on a large, flat surface, there’s a lot of contact, and it’s enough to permanently deform a particle that’s really thin and flexible.”

In the new study, the Rice team decided to see if this force could be used to manipulate 8nm-thick sheets of ductile silver. After a mathematical model suggested it was possible, the researchers placed 15nm-wide iron oxide nanospheres on a surface and then sprinkled prism-shaped nanosheets over them.

Without applying any other force, they saw through a transmission electron microscope that the nanosheets acquired permanent bumps where none existed before, right on top of the spheres. As measured, the distortions were about 10 times larger than the width of the spheres.

These hills weren’t very high, but simulations confirmed that van der Waals attraction between the sheet and the substrate surrounding the spheres was sufficient to influence the plasticity of the silver sheet’s crystalline atomic lattice. The researchers also showed that the same effect would occur in silicon dioxide and cadmium selenide nanosheets, and perhaps other compounds.

“We were trying to make really thin, large silver nanoplates and when we started taking images, we saw these strange, six-fold strain patterns, like flowers,” said Jones, who earned a multiyear Packard Fellowship in 2018 to develop advanced microscopy techniques.

“It didn’t make any sense, but we eventually figured out that it was a little ball of gunk that the plate was draped over, creating the strain,” he said. “We didn’t think anyone had investigated that, so we decided to have a look.

“What it comes down to is that when you make a particle really thin, it becomes really flexible, even if it’s a rigid metal.”

In further experiments, the researchers discovered that the nanospheres could be used to control the shape of the deformation, ranging from single ridges when two spheres are close together to saddle shapes or isolated bumps when the spheres are farther apart. They determined that sheets less than about 10nm thick and with aspect ratios of about 100 are most amenable to deformation.

In the paper, the researchers noted their technique creates “a new class of curvilinear structures based on substrate topography” that “would be difficult to generate lithographically”. That opens up new possibilities for electromagnetic devices that are especially relevant to nanophotonic research. Straining the silver lattice could also turn the inert metal into a possible catalyst, by creating defects where chemical reactions can happen.

“This gets exciting because now most people make these kinds of metamaterials through lithography,” Jones said. “That’s a really powerful tool, but once you’ve used that to pattern your metal, you can never change it.

“Now we have the option, perhaps someday, to build a material that has one set of properties and then change it by deforming it. Because the forces required to do so are so small, we hope to find a way to toggle between the two.”

This story is adapted from material from Rice University, with editorial changes made by Materials Today. The views expressed in this article do not necessarily represent those of Elsevier. Link to original source.

Source: https://www.materialstoday.com/nanomaterials/news/weak-force-impact-metal-nanosheets/

Continue Reading

Material Science

Glass forming by metallic mixtures becomes clearer


Researchers at the University of Tokyo used computer simulations to model the effects of elemental composition on the glass-forming ability of metallic mixtures. Image: Institute of Industrial Science, the University of Tokyo.
Researchers at the University of Tokyo used computer simulations to model the effects of elemental composition on the glass-forming ability of metallic mixtures. Image: Institute of Industrial Science, the University of Tokyo.

Researchers from the Institute of Industrial Science at the University of Tokyo in Japan have used molecular dynamics calculations to simulate the glass-forming ability of metallic mixtures. They show that even small changes in composition can strongly influence the likelihood that a material will assume a crystalline versus a glassy state upon cooling. This work, reported in a paper in Science Advances, may lead to a universal theory of glass formation and cheaper, more resilient, electroconductive glasses.

Although a table might be set with expensive 'crystal' glasses, crystal and glass are actually two very different states that liquids, including liquid metals, can assume as they cool. A crystal has a defined three-dimensional lattice structure that repeats indefinitely, while glass is an amorphous solid that lacks long-range ordering.

Current theories of glass formation cannot accurately predict which metallic mixtures will 'vitrify' to form a glass and which will crystallize. A better, more comprehensive understanding of glass formation would be a great help when designing new recipes for mechanically tough, electrically conductive materials.

Now, researchers at the University of Tokyo have used computer simulations of three prototypical metallic systems to study the process of glass formation. "We found that the ability for a multi-component system to form a crystal, as opposed to a glass, can be disrupted by slight modifications to the composition," says first author Yuan-Chao Hu.

Stated simply, glass formation is the consequence of a material avoiding crystallization as it cools. This locks the atoms into a 'frozen' state before they can organize themselves into their energy-minimizing pattern. The researchers' simulations showed that a critical factor determining the rate of crystallization was the liquid-crystal interface energy.

The researchers also found that changes in elemental composition can lead to local atomic orderings that frustrate the process of crystallization, because these orderings are incompatible with the crystal's usual form. Specifically, these structures can prevent tiny crystals from acting as 'seeds' that nucleate the growth of ordered regions in the sample. In contrast with previous explanations, the scientists determined that the chemical potential difference between the liquid and crystal phases has only a small effect on glass formation.

"This work represents a significant advancement in our understanding of the fundamental physical mechanism of vitrification," says senior author Hajime Tanaka. "The results of this project may also help glass manufacturers design new multi-component systems that have certain desired properties, such as resilience, toughness and electroconductivity."

This story is adapted from material from the University of Tokyo, with editorial changes made by Materials Today. The views expressed in this article do not necessarily represent those of Elsevier. Link to original source.

Republished by Plato

Published

on


Researchers at the University of Tokyo used computer simulations to model the effects of elemental composition on the glass-forming ability of metallic mixtures. Image: Institute of Industrial Science, the University of Tokyo.
Researchers at the University of Tokyo used computer simulations to model the effects of elemental composition on the glass-forming ability of metallic mixtures. Image: Institute of Industrial Science, the University of Tokyo.

Researchers from the Institute of Industrial Science at the University of Tokyo in Japan have used molecular dynamics calculations to simulate the glass-forming ability of metallic mixtures. They show that even small changes in composition can strongly influence the likelihood that a material will assume a crystalline versus a glassy state upon cooling. This work, reported in a paper in Science Advances, may lead to a universal theory of glass formation and cheaper, more resilient, electroconductive glasses.

Although a table might be set with expensive ‘crystal’ glasses, crystal and glass are actually two very different states that liquids, including liquid metals, can assume as they cool. A crystal has a defined three-dimensional lattice structure that repeats indefinitely, while glass is an amorphous solid that lacks long-range ordering.

Current theories of glass formation cannot accurately predict which metallic mixtures will ‘vitrify’ to form a glass and which will crystallize. A better, more comprehensive understanding of glass formation would be a great help when designing new recipes for mechanically tough, electrically conductive materials.

Now, researchers at the University of Tokyo have used computer simulations of three prototypical metallic systems to study the process of glass formation. “We found that the ability for a multi-component system to form a crystal, as opposed to a glass, can be disrupted by slight modifications to the composition,” says first author Yuan-Chao Hu.

Stated simply, glass formation is the consequence of a material avoiding crystallization as it cools. This locks the atoms into a ‘frozen’ state before they can organize themselves into their energy-minimizing pattern. The researchers’ simulations showed that a critical factor determining the rate of crystallization was the liquid-crystal interface energy.

The researchers also found that changes in elemental composition can lead to local atomic orderings that frustrate the process of crystallization, because these orderings are incompatible with the crystal’s usual form. Specifically, these structures can prevent tiny crystals from acting as ‘seeds’ that nucleate the growth of ordered regions in the sample. In contrast with previous explanations, the scientists determined that the chemical potential difference between the liquid and crystal phases has only a small effect on glass formation.

“This work represents a significant advancement in our understanding of the fundamental physical mechanism of vitrification,” says senior author Hajime Tanaka. “The results of this project may also help glass manufacturers design new multi-component systems that have certain desired properties, such as resilience, toughness and electroconductivity.”

This story is adapted from material from the University of Tokyo, with editorial changes made by Materials Today. The views expressed in this article do not necessarily represent those of Elsevier. Link to original source.

Source: https://www.materialstoday.com/amorphous/news/glass-forming-by-metallic-mixtures-becomes-clearer/

Continue Reading

Material Science

Material Science News | Materials Research

Scintacor: An Overview of Its Products and Capabilities

In this interview, AZoM talks to Ed Bullard and Martin Lewis, CEO and Principal Engineer at Scintacor respectively, about Scintacor, the companies products, capabilities, and vision for the future.

Republished by Plato

Published

on

Scintacor: An Overview of Its Products and Capabilities

In this interview, AZoM talks to Ed Bullard and Martin Lewis, CEO and Principal Engineer at Scintacor respectively, about Scintacor, the companies products, capabilities, and vision for the future.

Source: https://www.azom.com/materials-news-index.aspx

Continue Reading
Heartland3 days ago

Florida Bill Aims to Legalize Medical Magic Mushrooms

Material3 days ago

Nanocrystallization of a Ti40 cladding layer by ultrasonic impact to improve burn resistance

Heartland3 days ago

Delta 8: Shipping Vape Ban Goes Into Effect Soon – What Does It Means?

Heartland2 days ago

Explained: How CBD Oil is Different Than CBD Capsule?

Material4 days ago

Investigation of severe lunar environmental conditions on the physical and mechanical properties of lunar regolith geopolymers

Heartland4 days ago

Affordable cbd oil?

Material3 days ago

Wear behavior of nanostructured carbo-austempered cast steels under rolling-sliding conditions

Heartland3 days ago

Metal3 days ago

Local Turkish DKP grade scrap prices remain stable

Material5 days ago

Friction resistance and bonding strength of high vanadium alloy steel/low carbon steel bimetal after heat treatments

Material4 days ago

Dielectric properties and potential applications of alizarin yellow GG-Cu(II) complex film blended with polyvinyl alcohol

Material3 days ago

Chemical attack and corrosion resistance of concrete prepared with electrolyzed water

Material5 days ago

A new approach to study combination mixture organic solvent ethylene carbonate with lithium-ion for alkali-ion battery: A density functional theory

Heartland4 days ago

Heartland4 days ago

Perfect harmony blended with an inked soul, Craig Cavanagh to create sensations in the mind

Manufacturing4 days ago

What can I use besides injection moulding?

Material4 days ago

A method for estimating superplastic material parameters via free–inflation tests

Heartland3 days ago

Unnamed Company Tried to Buy Aphria While It Was Negotiating Tilray Merger

Material3 days ago

Growth kinetics of the FeB/Fe2B boride layer on the surface of 4Cr5MoSiV1 steel: experiments and modelling

Material3 days ago

Competitive mechanisms occurring during quenching and partitioning of three silicon variants of 0.4 wt.% carbon steels

Material5 days ago

Effect of Al content on the high-temperature oxidation behavior of 18Cr–Al–Si ferritic heat-resistant stainless steel

Manufacturing4 days ago

Making a Yellow Taxi Toplight

Material4 days ago

Correlative cross-sectional characterization of nitrided, carburized and shot-peened steels: synchrotron micro-X-ray diffraction analysis of stress, microstructure and phase gradients

Material3 days ago

Influence of heavy metal oxides to the mechanical and radiation shielding properties of borate and silica glass system

Heartland3 days ago

CBD and Inflammation

Heartland3 days ago

Bermuda Prepares To Lock Horns With United Kingdom Over Adult Use Cannabis

Material4 days ago

Fatigue rate evaluation of a transparent polyester resin subjected to low-temperature environments

Heartland3 days ago

Efficacy of CBD Edibles

Material3 days ago

Activated carbon electrode with promising specific capacitance based on potassium bromide redox additive electrolyte for supercapacitor application

Heartland3 days ago

Where To Buy CBD in Fort Worth

Trending

A Cloud Nine Capital Entity Copyright © 2020 – All Rights Reserved Proudly Made in America