Connect with us

News

How CBD Oil is Made

Now that cultivation of hemp has become legal in some parts of the world, there are widespread discussions about its unique properties.  Since it is derived from hemp which is a strain of cannabis, people had apprehensions about this product. However, with widespread media coverage usage, it has steadily become common to use. CBD is one of the many cannabidiols that exist naturally in the Cannabis plant along with THC. There’s a difference between  plants rich in CBD and those rich in THC. The former is called Indica-dominant plants while latter is sativa rich plants. CBD oil is Curative and …

Read moreHow CBD Oil is Made

The post How CBD Oil is Made appeared first on Pure CBD Vapors.

Republished by Plato

Published

on

Now that cultivation of hemp has become legal in some parts of the world, there are widespread discussions about its unique properties.  Since it is derived from hemp which is a strain of cannabis, people had apprehensions about this product. However, with widespread media coverage usage, it has steadily become common to use. CBD is one of the many cannabidiols that exist naturally in the Cannabis plant along with THC. There’s a difference between  plants rich in CBD and those rich in THC. The former is called Indica-dominant plants while latter is sativa rich plants.

CBD oil is Curative and Non-Psychoactive

CBD rich oil is also used as a chief ingredient in vaping oil for use in e-cigarettes which can gradually reduce smoking as it does not have the ill effects of regular nicotine rich tobacco smoke that destroys lungs over a period of time. [Source]

What is CBD Oil Derived From?

The cannabidiol oil is derived from flowers of cannabis plants and is concentrated in its resin glands or trichomes. These glands contain oil that is rich in CBD. It differs in quality and quantity between different strains of the cannabis plant. The active CBD available in the flower can be purified and concentrated using precise production techniques. When oil of high potency and concentration is derived from the glands then it can be used in lesser dosage. This lesser dosage saves money. That’s because CBD oil is an expensive product but produces those desired effect.

Production of CBD oil

Industrial production of CBD oil is done by combining the cannabinoid rich plant with other compounds. These consist of CO², butane, ethanol, olive oil, etc. All of which leave their residues in the final product. Most important part of CBD extraction is selection of the right plant. The cost of final product will depend on its potency and purity which’s controllable only via oil extraction technique. [Source]

Carrier Oil Extraction Method

This is regarded as most inexpensive method of extracting. CBD oil extracted by this method will contain a dose of Omega rich acids and minimalistic chemical residues in the pure oil. Usually, hemp seed oil or olive oil is used as a carrier in these methods. It’s the most effective way to extract resin from the plants and flowers. Only drawback is the short shelf life of oil extracted in this manner. Although, it’s highly effective when taken orally or applied topically on the skin.

CO² Extraction or Decarboxylation Method

Considered the most scientific method. This is also among the cleanest techniques of extraction. Referred to as sub-critical or super critical CO² method, it uses carbon dioxide under different pressures to extract the medicinal oil. This is among the most expensive techniques of extraction due to use of hi-tech equipment that can be operated by trained personnel only. The advantage of this technique is that the end product is the purest form of CBD oil which is highly potent and free of chlorophyll. However if the heat used during extraction is too high it can damage terpenes in the oil that have therapeutic benefits and provide flavor and essence to the oil strain.

Extraction with Solvents

Being a relatively inexpensive method it is preferred by small scale producers of CBD and THC oils. During extraction this method uses solvents like butane, ethanol and alcohol derived from grains. This method has several disadvantages the worst of which is potential of explosion while the second is leftover residue of these solvents. Scientists and doctors advice against the use of this method as it can make the end product unsafe for medical use and also can make existing medical condition much worse. When there are unsafe residues in CBD oil it reduces healing powers and can even compromise health of patients.

Extraction of Cannabis Oil with Grain Alcohol

This method yields medicinal grade CBD oil of around two to four grams for each flower. With grain alcohol there is minimal residue and impurities in the oil that should be consumed directly instead of vaping or smoking.

CBD Oils for Electronic Cigarettes

Only high grade CBD oil is used for manufacture of e-liquid or vaping oil that is used in electronic cigarettes.  The vaping liquids used in both disposable and non disposable electronic cigarettes are made as compounds with CBD oil, alkaline e-liquids, vegetable glycerin, flavors and also nicotine to give smokers the feeling of a real cigarette. But buyers of e-liquid refills should read the details of ingredients on the bottle of e-liquid to ensure that they are not using synthetic ingredients like propylene glycol or formaldehyde.

The CBD oil that is extracted from these methods is thick in consistency unlike e-liquids which is used in e-cigarettes for vaping.

Author: Joshua Willard (Freelance CBD Content Writer/Editor)

FDA Disclosure Statement: These statements have not been evaluated by the Food and Drug Administration. These products are not intended to diagnose, treat, cure or prevent any disease.

 

Source: https://www.purecbdvapors.com/cbd-oil-made/

News

House Of Representatives Schedules Vote On MORE Act

The U.S. House of Representatives is planning to vote on the MORE Act in the first week of December.

Republished by Plato

Published

on


House Of Representatives Schedules Vote On MORE Act | High Times



























Source: https://hightimes.com/news/house-representatives-schedules-vote-more-act/

Continue Reading

News

Georgia Accepting Applications for Medical Cannabis Production

The process for getting licensed will be competitive.

Republished by Plato

Published

on


Georgia Accepting Applications for Medical Cannabis Production | High Times


























Source: https://hightimes.com/news/georgia/georgia-accepting-applications-medical-cannabis-production/

Continue Reading

News

HempFusion IPO Order Book Closing

NOT FOR DISTRIBUTION IN THE UNITED STATES OR DISSEMINATION IN THE UNITED STATES HempFusion Wellness Inc. (“HempFusion” or the “Company”) is pleased to announce that, due to demand, it is accelerating the date in which Expressions of Interest (“EOI”) for HempFusion’s proposed IPO will be accepted, to this Friday, November 27th, at 5:00 PM EST. Orders will be accepted on […]

The post HempFusion IPO Order Book Closing appeared first on CannabisFN.

Republished by Plato

Published

on

Disclaimer: Matters discussed on this website contain forward-looking statements that are subject to certain risks and uncertainties that could cause actual results to differ materially from any future results, performance or achievements expressed or implied by such statements. CFN Media Group, which owns CannabisFN, is not registered with any financial or securities regulatory authority and does not provide nor claims to provide investment advice or recommendations to readers of this release. CFN Media Group, which owns CannabisFN, may from time-to-time have a position in the securities mentioned herein and will increase or decrease such positions without notice. The Information contains forward-looking statements, i.e. statements or discussions that constitute predictions, expectations, beliefs, plans, estimates, or projections as indicated by such words as “expects”, “will”, “anticipates”, and “estimates”; therefore, you should proceed with extreme caution in relying upon such statements and conduct a full investigation of the Information and the Profiled Issuer as well as any such forward-looking statements. Any forward looking statements we make in the Information are limited to the time period in which they are made, and we do not undertake to update forward looking statements that may change at any time; The Information is presented only as a brief “snapshot” of the Profiled Issuer and should only be used, at most, and if at all, as a starting point for you to conduct a thorough investigation of the Profiled Issuer and its securities and to consult your financial, legal or other adviser(s) and avail yourself of the filings and information that may be accessed at www.sec.gov, www.pinksheets.com, www.otcmarkets.com or other electronic sources, including: (a) reviewing SEC periodic reports (Forms 10-Q and 10-K), reports of material events (Form 8-K), insider reports (Forms 3, 4, 5 and Schedule 13D); (b) reviewing Information and Disclosure Statements and unaudited financial reports filed with the Pink Sheets or www.otcmarkets.com; (c) obtaining and reviewing publicly available information contained in commonlyknown search engines such as Google; and (d) consulting investment guides at www.sec.gov and www.finra.com. You should always be cognizant that the Profiled Issuers may not be current in their reporting obligations with the SEC and OTCMarkets and/or have negative signs at www.otcmarkets.com (See section below titled “Risks Related to the Profiled Issuers, which provides additional information pertaining thereto). For making specific investment decisions, readers should seek their own advice and that of their own professional advisers. CFN Media Group, which owns CannabisFN, may be compensated for its Services in the form of cash-based and/or equity-based compensation in the companies it writes about, or a combination of the two. For full disclosure, please visit: https://www.cannabisfn.com/legal-disclaimer/. A short time after we acquire the securities of the foregoing company, we may publish the (favorable) information about the issuer referenced above advising others, including you, to purchase; and while doing so, we may sell the securities we acquired. In addition, a third-party shareholder compensating us may sell his or her shares of the issuer while we are publishing favorable information about the issuer. Except for the historical information presented herein, matters discussed in this article contain forward-looking statements that are subject to certain risks and uncertainties that could cause actual results to differ materially from any future results, performance or achievements expressed or implied by such statements. CFN Media Group, which owns CannabisFN, is not registered with any financial or securities regulatory authority, and does not provide nor claims to provide investment advice or recommendations to readers of this release. CFN Media Group, which owns CannabisFN, may from time to time have a position in the securities mentioned herein and will increase or decrease such positions without notice. For making specific investment decisions, readers should seek their own advice and that of their own professional advisers. CFN Media Group, which owns CannabisFN, may be compensated for its Services in the form of cash-based and/or equity- based compensation in the companies it writes about, or a combination of the two. For full disclosure please visit: https://www.cannabisfn.com/legal-disclaimer/.

Copyright © Accelerize Inc. · All Rights Reserved · Privacy Policy · Legal Disclaimer

Source: https://www.cannabisfn.com/2886831-2/

Continue Reading
CBD3 days ago

CBD News: CBD court ruling brings additional support in Germany for access

Metal4 days ago

RINL subsidiary BSLC seeks to make dolomite supplies to other steel mills

Material6 hours ago

Improved sinter-bonding properties of silver-coated copper flake paste in air by the addition of sub-micrometer silver-coated copper particles

CBD3 days ago

GreenheartCBD Founder Paul Walsh named to the All-Ireland Business All Star List

Material4 days ago

Fabrication and characterization of nanostructured zinc oxide on printed microcontact electrode for piezoelectric applications

Material4 days ago

Gamma radiation modified the optical, electrical, and antibacterial characterization of CuONPs doped in Polyethylene Oxide/Polyvinyl Alcohol

Heartland4 days ago

REVIEW: High Five Duo

Manufacturing5 days ago

Building Fundamentals of Manufacturing

Heartland4 days ago

Plus Products Trims Losses As Revenues Rise

News4 days ago

CBDPure Coupon Code for 2020 Holiday’s

Heartland2 days ago

Everything You Need to Know About the Miraculous Health Benefits of Cannabidiol

News5 days ago

Maine’s First Month Of Legal Marijuana Sales Total $1.4M

Uncategorized4 days ago

Did Joe Biden and Kamala Harris Just Pull A Fast One On The Cannabis Industry?

Uncategorized4 days ago

Easy Cranberry Cannabis Pistachio Cheese Log

Heartland4 days ago

Pairing beer and weed: a match made in heaven

Heartland5 days ago

News4 days ago

AM Solutions unveils new technology and test centre

Heartland4 days ago

British Virgin Islands: Medical Cannabis Momentum Stalls

Heartland4 days ago

Subversive SPAC Forms The Parent Company With Jaz-Z, Roc Nation

Heartland4 days ago

Do I need to take CBD oil every day for Anxiety?

Heartland4 days ago

How to Protect Your Intellectual Property

Heartland4 days ago

Hemp Biomass Decarboxylation Service Market 2020 Share, Vendor Detail, Technologies …

Heartland4 days ago

3 Delta-8 THC Flowers You Must Try This Black Friday

Heartland5 days ago

Uncategorized4 days ago

Aleafia Health Launches Kin Slips® Rapid Onset Cannabis-Infused Sublingual Strips

Heartland4 days ago

The LA Green Wednesday Steals and Deals Guide 2020

Heartland4 days ago

Hemp Pain — Crop falling out of favor with growers

Heartland4 days ago

Global Hemp Seeds Market 2020 : Industry Analysis by Top Countries Data Definition, Size, Share …

Heartland3 days ago

Vireo Health Q3 Revenue Increases 11% Sequentially to $11.9 Million

Heartland5 days ago

Trending

A Cloud Nine Capital Entity Copyright © 2020 – All Rights Reserved Proudly Made in America