Connect with us

Heartland

Effect of various factors on ethanol yields from lignocellulosic biomass by Thermoanaerobacterium AK₁₇

The ethanol production capacity from sugars and lignocellulosic biomass hydrolysates (HL) by Thermoanaerobacterium strain AK(17) was studied in batch cultures. The strain converts various carbohydrates to, acetate, ethanol, hydrogen, and carbon dioxide. Ethanol yields on glucose and xylose were 1.5 and 1.1 mol/mol sugars, respectively. Increased initial glucose concentration inhibited glucose degradation and end product formation leveled off at 30 mM concentrations. Ethanol production from 5 g…

Republished by Plato

Published

on

The ethanol production capacity from sugars and lignocellulosic biomass hydrolysates (HL) by Thermoanaerobacterium strain AK(17) was studied in batch cultures. The strain converts various carbohydrates to, acetate, ethanol, hydrogen, and carbon dioxide. Ethanol yields on glucose and xylose were 1.5 and 1.1 mol/mol sugars, respectively. Increased initial glucose concentration inhibited glucose degradation and end product formation leveled off at 30 mM concentrations. Ethanol production from 5 g L(-1) of complex biomass HL (grass, hemp, wheat straw, newspaper, and cellulose) (Whatman paper) pretreated with acid (0.50% H(2) SO(4)), base (0.50% NaOH), and without acid/base (control) and the enzymes Celluclast and Novozyme 188 (0.1 mL g(-1) dw; 70 and 25 U g(-1) of Celluclast and Novozyme 188, respectively) was investigated. Highest ethanol yields (43.0 mM) were obtained on cellulose but lowest on hemp leafs (3.6 mM). Chemical pretreatment increased ethanol yields substantially from lignocellulosic biomass but not from cellulose. The influence of various factors (HL, enzyme, and acid/alkaline concentrations) on end-product formation from 5 g L(-1) of grass and cellulose was further studied to optimize ethanol production. Highest ethanol yields (5.5 and 8.6 mM ethanol g(-1) grass and cellulose, respectively) were obtained at very low HL concentrations (2.5 g L(-1)); with 0.25% acid/alkali (v/v) and 0.1 mL g(-1) enzyme concentrations. Inhibitory effects of furfural and hydroxymethylfurfural during glucose fermentation, revealed a total inhibition in end product formation from glucose at 4 and 6 g L(-1), respectively.

Source: https://pubmed.ncbi.nlm.nih.gov/22012653/?utm_source=no_user_agent&utm_medium=rss&utm_campaign=pubmed-2&utm_content=1XAOX_jnjTyCUo06Xbq0lslwi760CIxcWfQx0n9x5BPH5yV1sN&fc=20200804212910&ff=20200814034136&v=2.11.5

Heartland

Republished by Plato

Published

on

Source:

Continue Reading

Heartland

Republished by Plato

Published

on

Source:

Continue Reading

Heartland

Republished by Plato

Published

on

Source:

Continue Reading
Heartland2 days ago

Florida Bill Aims to Legalize Medical Magic Mushrooms

Heartland3 days ago

Affordable cbd oil?

Material3 days ago

Nanocrystallization of a Ti40 cladding layer by ultrasonic impact to improve burn resistance

Heartland3 days ago

Metal2 days ago

Local Turkish DKP grade scrap prices remain stable

Heartland1 day ago

Explained: How CBD Oil is Different Than CBD Capsule?

Heartland5 days ago

Are there any definitive studies about CBD oil and testosterone? TIA

Material4 days ago

Friction resistance and bonding strength of high vanadium alloy steel/low carbon steel bimetal after heat treatments

Material4 days ago

Investigation of severe lunar environmental conditions on the physical and mechanical properties of lunar regolith geopolymers

Material3 days ago

Dielectric properties and potential applications of alizarin yellow GG-Cu(II) complex film blended with polyvinyl alcohol

Material3 days ago

Wear behavior of nanostructured carbo-austempered cast steels under rolling-sliding conditions

Material2 days ago

Chemical attack and corrosion resistance of concrete prepared with electrolyzed water

Material4 days ago

A new approach to study combination mixture organic solvent ethylene carbonate with lithium-ion for alkali-ion battery: A density functional theory

Heartland4 days ago

Heartland4 days ago

Perfect harmony blended with an inked soul, Craig Cavanagh to create sensations in the mind

Manufacturing3 days ago

What can I use besides injection moulding?

Material3 days ago

A method for estimating superplastic material parameters via free–inflation tests

Material3 days ago

Growth kinetics of the FeB/Fe2B boride layer on the surface of 4Cr5MoSiV1 steel: experiments and modelling

Heartland2 days ago

Delta 8: Shipping Vape Ban Goes Into Effect Soon – What Does It Means?

Material2 days ago

Competitive mechanisms occurring during quenching and partitioning of three silicon variants of 0.4 wt.% carbon steels

News5 days ago

New Study Suggests Link Between Cannabis Legalization And Decline In Workers Comp Claims

Material4 days ago

Effect of Al content on the high-temperature oxidation behavior of 18Cr–Al–Si ferritic heat-resistant stainless steel

Manufacturing4 days ago

Making a Yellow Taxi Toplight

Material3 days ago

Correlative cross-sectional characterization of nitrided, carburized and shot-peened steels: synchrotron micro-X-ray diffraction analysis of stress, microstructure and phase gradients

Heartland3 days ago

Unnamed Company Tried to Buy Aphria While It Was Negotiating Tilray Merger

Material3 days ago

Influence of heavy metal oxides to the mechanical and radiation shielding properties of borate and silica glass system

Heartland3 days ago

CBD and Inflammation

Heartland2 days ago

Bermuda Prepares To Lock Horns With United Kingdom Over Adult Use Cannabis

Material4 days ago

Fatigue rate evaluation of a transparent polyester resin subjected to low-temperature environments

Heartland3 days ago

Efficacy of CBD Edibles

Trending

A Cloud Nine Capital Entity Copyright © 2020 – All Rights Reserved Proudly Made in America